Do you want to learn how to bypass all safety switches on a lawnmower?
Sometimes, the lawnmower’s safety switches make it difficult for you to mow as per your wish. In this case, if you temporarily bypass all safety switches on a lawnmower, the problem might be solved.
As the name suggests, the safety switches on lawnmowers have been made for your safety. However, if they act as obstacles then getting rid of them might be a good option.
Moreover, bypassing the safety switches on the lawnmower is not a tough row to hoe. Following a few steps with proper guidance will help you achieve your target.
Safety Switches On A Lawnmower
First of all, let’s see how many types of safety switches are present on a lawnmower.
- Brake/Mower deck safety switch
The purpose of this safety switch is to prevent the engine from starting unless this switch is turned off.
- Cutting blade safety switch
This safety switch ensures that the cutting blades are being used in a safe mode.
The purpose of this safety switch is to prevent the engine from starting unless this switch is turned off.
- Power Take-Off (PTO) switch
While mowing, the mower turns off automatically if there are bumps on the land area. This is done by the PTO switch.
- Seat safety switch
The seat safety switch prevents lawnmowers from racing across the land when the rider is not there on the seat.
Why Bypass Safety Switches on Lawnmowers?
Although the safety switches on lawnmowers are there so that you don’t hurt yourself, however, you might want to bypass them since they might annoy you.
Moreover, when you have to do some sort of repair, you have to bypass all the safety switches on the lawnmower.
Sometimes, people want to convert lawnmowers into racing mowers. This can be done by removing the lower part and bypassing safety switches on a riding lawnmower.
Bypassing Safety Switches On A Lawnmower – Complete Guide
Remember, if you bypass all the safety switches on the lawnmower, you won’t be left with any safety measures in case of injury. Therefore, if you are sure that you can go on without these safety norms, go for it.
To bypass safety switches, you might need these tools:
- Tape
- Wirecutter
- Plier
- Wire connector
Bypassing The Seat Safety Switch
The seat safety switch which is present under the mower seat might be quite irritating if you want to switch on the mower without sitting down on the seat because this safety switch prevents this. Let’s find out how to bypass the seat safety switch on a lawnmower.
- Step 1
- The initial step is to make sure to put the steering lever on parking mode and to turn the engine off.
- It is also important to prevent the mower from sliding or moving, you can do this by setting the mower on a flat surface of the ground.
- Step 2
- Disconnect the battery terminal before performing any electrical task on the lawnmower.
- You may unplug the red and black terminals to be safe from electrical shocks.
- Step 3
- Flip over the seat of the mower since the seat safety switch is there under the seat.
- The seat safety switches maybe a 3 wire seat safety and a 4 wire seat safety switch. You may find both switch sockets beneath the mower seat.
- Step 4
- Now remove the safety switch connection from the bottom of the seat. Pull the wire outside with the help of a plier to disconnect it from the socket.
- Step 5
- The next step is to cut the wires of the safety switch, connect them and tape them together. You can also tape them individually.
- Now check if the safety switch has been properly disabled.
- Step 6
- Last but not least, set the seat back to its position.
- Hopefully, the seat safety switch will be bypassed with these easy steps. You have to be very careful once you have bypassed the safety switch.
Bypassing The Mower Deck or PTO Safety Switch
The mower deck safety switch is also called the brake safety switch. When this switch is on, the engine of the mower cannot start. Similarly, while mowing on bumpy or hilly land areas, the mower engine turns off because of the PTO safety switch. This can act as an obstacle sometimes.
So, let’s find out how to bypass the mower deck or PTO safety switch, as both of these are pretty much the same procedures.
- Step 1
- Find out the mower deck safety switch and the PTO switch socket behind the engine of the lawnmower.
- Step 2
- Disconnect the safety switches from the blades of the mower by cutting the purple-colored wire off the socket.
- Step 3
- Connect the terminals of the two wires and wrap them together with the help of electrical tape.
- To avoid any disturbances while riding the mower, collect and assemble all the wires and place them in the mower engine deck.
- To make sure that all the safety switches have been bypassed properly, have a test ride and see if the frequent warning alerts or frequent shutting off of the engine has been disabled.
Final Verdict
This was a detailed guide on how to bypass all safety switches on a lawnmower. However, it is strongly suggested that only disable these safety switches if you are completely sure that you can go on without the safety measures and that you are expert enough to ride the mower without the safety switches and without being injured.